Hatimin Injin Famfon Diaphragm
Cikakkun Bayanan Samfura
| Sunan Samfuri | Hatimin Injin Famfon Diaphragm |
| Daidaiton Matsayi | ± 2μm don girman kayan aiki ≤ 600mm x 300mm |
| Faɗi | ≤ 5μm |
| Rayuwar Mold | 500,000 - 3,000,000 Shots |
| Launi | Azurfa, baƙi, OEM |
| Tauri | 30-90 bakin teku bisa ga yanayin aiki |
| Fasaha | matsi, allura ko fitarwa |
| Haƙuri | ±0.05mm |
| Yawan yawa | 1.0-2.0g/cm² |
| Rayuwar aiki | Shekaru 10-30 |
| aiki | 1. Kyakkyawan rufewa da damping 2. Juriyar ruwa 3. Maganin tsufa 4. Maganin hana iskar oxygen 5. Mai juriya ga mai 6. juriya ga matsin lamba |
Dangane da yanayin aikace-aikacen abokan ciniki, samar da ƙira daban-daban na kayan aiki, NBR, HNBR, XNBR, EPDM, VMQ, CR, FKM, AFLAS, FVMQ, FFKM, PTFE, PU, ECO, NR, SBR, IIR, ACM. Zafin yanayi mai dacewa - 100℃~320℃, juriyar ozone, juriyar yanayi, juriyar zafi, juriyar sinadarai, juriyar mai, matse ruwa, juriyar sanyi, juriyar abrasion, juriyar nakasa, juriyar acid, ƙarfin tensile, juriyar tururin ruwa, ƙarfin ƙonewa, da sauransu.
Amfanin Samfuri
Fasaha mai girma, inganci mai karko
Shahararrun kamfanoni masu tasowa wajen fahimtar ingancin samfura
farashin da ya dace
Gyara mai sassauƙa
cika buƙatun abokin ciniki gaba ɗaya
Ribar Mu
1. Kayan aikin samarwa na zamani:
Cibiyar injinan CNC, injin haɗa roba, injin preforming, injin gyaran injin hydraulic na injin tsotsa, injin allura ta atomatik, injin cire gefen atomatik, injin cire lebe na biyu (injin yanke lebe na hatimin mai, tanda ta PTFE), da sauransu.
2. Kayan aikin dubawa cikakke:
①Babu na'urar gwada ƙurajen rotor (gwada a wane lokaci da kuma a wane zafin jiki aikin ƙurajen ya fi kyau).
②Mai gwada ƙarfin taurin kai (danna tonon roba zuwa siffar dumbbell sannan ka gwada ƙarfin a saman da ƙasan ɓangarorin).
③An shigo da na'urar gwajin tauri daga Japan (juriyar ƙasa da ƙasa ita ce +5, kuma ma'aunin jigilar kaya na kamfanin shine +3).
④ Ana samar da na'urar haska bayanai a Taiwan (ana amfani da ita don auna girman samfurin da kuma yadda yake).
⑤Na'urar duba ingancin hoto ta atomatik (duba girman samfurin da bayyanarsa ta atomatik).
3. Fasaha mai kyau:
①Yana da ƙungiyar bincike da haɓaka fasaha daga kamfanonin Japan da Taiwan.
② An sanye shi da kayan aiki masu inganci da gwaji da aka shigo da su:
A. Cibiyar sarrafa mold da aka shigo da ita daga Jamus da Taiwan.
B. Kayan aikin samarwa masu mahimmanci da aka shigo da su daga Jamus da Taiwan.
C. Babban kayan gwajin an shigo da su ne daga Japan da Taiwan.
③Ta amfani da fasahar samarwa da sarrafawa ta duniya, fasahar samarwa ta samo asali ne daga Japan da Jamus.
4. Ingancin samfur mai dorewa:
① Ana shigo da dukkan kayan da aka ƙera daga: robar NBR nitrile, Bayer, FKM, DuPont, EPDM, LANXESS, silicone na SIL, Dow Corning.
②Kafin jigilar kaya, dole ne a yi gwaje-gwaje da gwaje-gwaje sama da 7 masu tsauri.
③A aiwatar da tsarin kula da inganci na duniya na ISO9001 da IATF16949 sosai.
