Discount Rubber Oil Seals Factory – High temperature&wear resistant PTFE oil seal – Yokey
Discount Rubber Oil Seals Factory – High temperature&wear resistant PTFE oil seal – Yokey Detail:
Advantages of PTFE oil seal
1. Chemical stability: almost all chemical resistance, strong acid, strong base or strong oxidant and organic solvents are not affected.
2. Thermal stability: the cracking temperature is above 400℃, so it can work normally in the range of -200℃350℃.
3 wear resistance: PTFE material friction coefficient is low, only 0.02, is 1/40 of rubber.
4. Self-lubrication: PTFE material has excellent self-lubrication performance, almost all viscous substances can not adhere to the surface.
What are the advantages of PTFE oil seal compared with ordinary rubber oil seal?
1. Ptfe oil seal is designed with wide lip power without spring, which can work normally under most working conditions;
2. When the shaft rotates, it automatically generates an inward thrust (the pressure is higher than the ordinary rubber oil seal), which can prevent the flow of fluid;
3. Ptfe oil seal can be suitable for no oil or less oil working environment, low friction characteristics after shutdown, compared with ordinary rubber oil seal is more widely used;
4. Ptfe seals can seal water, acid, alkali, solvent, gas, etc.;
5.PTFE oil seal can be used at a higher temperature of 350℃;
6. PTFE oil seal can withstand high pressure, can reach 0.6~2MPa, and can withstand high temperature and high speed.
Workshop
Application
excavators, engines, engineering machinery equipment, vacuum pumps, crushing hammers, chemical treatment equipment and various professional, the equipment is especially suitable for traditional rubber oil seal can not meet the application.
Product detail pictures:
Related Product Guide:
we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is You come here with difficulty and we supply you with a smile to take away for Discount Rubber Oil Seals Factory – High temperature&wear resistant PTFE oil seal – Yokey , The product will supply to all over the world, such as: Slovakia, Juventus, Munich, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Evelyn from Guatemala - 2018.06.28 19:27
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Anastasia from France - 2018.06.30 17:29