Factory source Hot Seal Rubber X Rings Quad Rings Seals

Short Description:

X Ring vs O-ring:

the sealing principle of the Quad-Ring ®/X-ring is nearly the same as the O-ring sealing. The initial sealing is achieved by the diametrical squeeze in a right angled groove. The system pressure itself creates a positive sealing force.

Following are some advantages of Quad-Rings ® /X-Rings:

With Quad-Rings ®/X-Rings the standard grooves are deeper in comparison with O-ring glands. So the diametrical sqeeuze is lower than with O-rings. This makes dynamic sealing possible with reduced friction.

The four lips of the Quad-Ring ®/X-Ring create more sealing capacity and at the same time a groove for lubrication, which, is very favorable for dynamic sealing.

The most important advanctage of the Quad-Ring ®/X-Ring is the high stability for dynamic applications. In the situation that an O-ring rolls in the groove and creates torsion, Quad-Ring ®/X-Ring will slide with nog negative results.

More resistant to spiral failure.

Send email to us

Product Detail

Product Tags

Adhering to the basic principle of “quality, provider, performance and growth”, we have now attained trusts and praises from domestic and global customer for Factory source Hot Seal Rubber X Rings Quad Rings Seals, We sincerely welcome buyers from both at your house and overseas to arrive to barter organization with us.
Adhering to the basic principle of “quality, provider, performance and growth”, we have now attained trusts and praises from domestic and global customer for China X Ring and X Shaped Ring, You should truly feel free to send us your requirements and we are going to respond to you asap. We’ve got a specialist engineering group to serve for your just about every detailed needs. Cost-free samples could be sent for yourself personally to understand much more information. In an effort to meet your requires, you should actually feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd products. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is really our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.

Different Material Rubber Parts

Silicone O-ring Gasket

1. Name: SIL/ Silicone/ VMQ

3. Working Temp.: -60 ℃ to 230 ℃

4. Advantage: Excellent resistance to Low temp. heat and elongation;

5. Disadvantage: Bad performance to tear, abrasion, gas, and Alkaline.

EPDM O-ring

1. Name: EPDM

3. Working Temp.:-55 ℃ to 150 ℃

4.Advantage:Excellent resistance to Ozon ,Flame, Weathering.

5.Disadvantage:Poor resistance to Oxygen Ated-solvent

FKM O-ring

FKM is a better grade compound which is well suited for prolonged exposure to oils at high operating temperatures.

FKM is also good for steam applications. Operating temperature range is -20℃ to 220℃ and is manufactured in black,white and brown. FKM is phthalate free and also available in metal detectable/x-ray inspectable.

Buna-N NBR Gasket O-ring

Abbreviation: NBR

Common Name:Buna N, Nitrile, NBR

Chemical Definition:Butadiene Acrylonitrile

General Characteristics:Waterproof,oilproof

Durometer-Range (Shore A):20-95

Tensile Range (P.S.I):200-3000

Elongation (Max.%):600

Compression Set:Good

Resilience-Rebound:Good

Abrasion Resistance:Excellent

Tear Resistance:Good

Solvent Resistance:Good to Excellent

Oil Resistance:Good to Excellent

Low Temperature Usage (°F):-30° to – 40°

High Temperature Usage (°F):to 250°

Aging Weather-Sunlight:Poor

Adhesion To Metals:Good to Excellent

Usal Hardness range:50-90 shore A

Advantage

1. Has good solvent, oil, water and hydraulic fluid resistance.

2. Good compression set, abrasion resistance and tensile strength.

Disadvantage

Not recommended for using in highly polar solvents such as acetone, and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons.

Usage: fuel tank, grease-box, hydraulic, gasoline, water, silicone oil, etc.

Workshop

workshop Adhering to the basic principle of “quality, provider, performance and growth”, we have now attained trusts and praises from domestic and global customer for Factory source Hot Seal Rubber X Rings Quad Rings Seals, We sincerely welcome buyers from both at your house and overseas to arrive to barter organization with us.
Factory source China X Ring and X Shaped Ring, You should truly feel free to send us your requirements and we are going to respond to you asap. We’ve got a specialist engineering group to serve for your just about every detailed needs. Cost-free samples could be sent for yourself personally to understand much more information. In an effort to meet your requires, you should actually feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd products. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is really our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.